产品中心

首页 > Product > Crusher series

Laboratory ultra mill



Product details:
1, laboratory ultra mill working principle:
This machine is used to realize the ultra fine crushing of dry and brittle materials in the form of rolling and cutting. It consists of the column shaped crushing chamber, a grinding wheel, grinding rail steel ring, wind machine, material collection (water cooled type equipped with cold water circulation system) system, and the like. The material passes through the feeding hole into the cylindrical grinding chamber and is crushed by the rolling wheel rolling and cutting of the circular motion along the track. Material was crushed by the fan caused by negative pressure airflow with a crushing chamber, into the material collection system, is filtered by the filter bag, the air is discharged, materials, dust was collected to complete the pieces.
2, laboratory ultra mill application:
This series of models can be widely used in traditional Chinese medicine, western medicine, pesticides, biological, cosmetics, food, feed, chemical, ceramics and other industries dry and brittle materials of ultra - crushing demand. Especially for fibrous (such as Chinese herbal medicine, Ganoderma lucidum, etc.), high toughness (animal horn, cotton, etc.), high hardness (such as glass, ceramics etc.) material crushing effect is more perfect, more suitable for colleges and scientific research units in the laboratory used for treatment of superfine powder, small batch experiments.
3, laboratory ultra mill characteristics:
1) the fineness is high, the crushing fineness of the plant fiber can reach 300-2000 m 8-20 (D98); the hard and brittle material is crushed to 1-5 m (D98), and some special materials are even finer.
2) the temperature is low, and the structure design can be effective to control the temperature of the material. Outside air flow into the crushing chamber after taking out the finished material, it will take away the heat generated by the body, so, at room temperature, the highest temperature of the product at 45 degrees Celsius, can meet the needs of most users. Of course, in order to meet the requirements of the high temperature of special users, this series of models can also be loaded with water cooling system, so as to achieve better results.
3) energy consumption is low, compared with other forms of ultrafine comminution, this series of models, which does not require air compressors and related ancillary equipment, the power consumption is greatly reduced; covers an area of small, saving space; operator control is simple, do not need too much, greatly saving manpower cost.
4) low energy consumption, material consumption, and material contact part of the use of high-quality stainless steel manufacturing, to avoid other media access; the whole structure is smooth, material crushing, collection, reduce the loss; grinding wheel rolling track the use of stainless steel materials, not easy to wear, long service life, thereby reducing the use of cost, and make the metal content of the finished product will not increase. The contact pressure of the grinding wheel and the grinding wheel of the core part of the mill is updated to the pneumatic adjusting device, which prolongs the service life, reduces the operation noise, and reduces the operation difficulty.
5) the control is simple, the electric control box and other design height is suitable, the machine can adjust the strong, because the main engine and the fan motor are used the frequency control technology to carry on the linear speed regulation, the user can be in any adjustment, better meet the variety of fineness. Most material feed fineness control in 30 eyes look, but tea leaf leafy material can not after crushing directly ultramicronization processing.
6) has the advantages of compact structure, low vibration, good integrity, unit all systems into a unified frame without foot screws fixed, can move randomly according to the use of the site.
4, laboratory ultra mill equipment parameters:
Model: ZNC-300
Material collection: cyclone separation
Structure: one type
Dust removal method: negative pressure dust collector
Voltage: 380V
Crushing principle: rolling shear
Power: 1.47 Kw
Material: 304 stainless steel
Weight: 170Kg (including water) 225Kg
Adjustment mode: frequency conversion (200r/min-1000r/min)
Exterior dimensions (mm):850 x 800 x 795 (water cooled) 1700 x 730 x 1350
Fineness of finished products: 300-13000 mesh (see material properties)
Output: 0.5-5Kg/h (depending on the material properties, initial fineness)
Feeding granularity: < 30 mesh


Copyright(C) Jiangyin City across Machinery Co., Ltd. .All Rights Reserved. service:南浩制药化工设备网
Tel:0510-86380089 add: No.181 Renmin North Road, Zhutang Town, Jiangyin City, Jiangsu, China 苏ICP备19024830号-1

在线客服